|
PowerBook G3 Series
CPU
CPU: PowerPC 750
CPU Speed: 233/250/292 MHz
FPU: integrated
Bus Speed: 83 MHz
Data Path: 64 bit
ROM: 4 MB
RAM Type: SO-DIMM
Minimum RAM Speed: 100 MHz
Onboard RAM: 0 MB
RAM slots: 2
Maximum RAM: 192 MB
Level 1 Cache: 32 kB data, 32 kB instruction
Level 2 Cache: 1 MB backside, 1:2
Expansion Slots: 2 Type II or 1 Type III PC Card
Video
Screen: 12.1/13.3/14.1" active matrix TFT
Max Resolution: 24 bit 1024x768
Video Out: VGA, s-video
Storage
Hard Drive: 2 GB
ATA Bus: IDE
Floppy Drive: removable 1.4 MB SuperDrive
Zip Drive: optional
Optical Drive: 24x CD-ROM or optional DVD-ROM
Input/Output
ADB: 1
Serial: 2
SCSI: HDI-30
Audio Out: stereo 16 bit mini
Audio In: stereo 16 bit mini
Speaker: stereo
Microphone: mono
Networking
Ethernet: 10Base-T
Miscellaneous
Codename: Main Street, Wall Street
Gestalt ID: 312
Power: 45 Watts
Dimensions: 2" H x 12.7" W x 10.4" D
Weight: 7.5 lbs.
Maximum OS: 10.2.8
Minimum OS: 8.1
Introduced: May 1998
Terminated: August 1998
Notes
The 233 MHz models used a PPC 740 processor, and had a 66 MHz bus and no
backside cache. The 12.1" models used a 16 bit, 832x624 passive matrix
screen, and had a gestalt ID of 314.
Announced in March 1998, The PowerBook G3 Series was an entirely new
design, which resembled its predecessor only in name. The G3 Series was
the first Built-to-Order PowerBook line, and filled Apple's PowerBook
offerings, from low to high end, with a single motherboard design. The G3
Series was available with a variety of BTO options including a 233, 250 or
292 MHz PPC750 processor and either a 12" passive-matrix screen, a 13.3"
TFT Active Matrix screen, or an incredible 14.1" TFT Active Matrix Screen.
All models included two RAM slots which used industry standard RAM modules
(the same used in most IBM Thinkpads), hardware 2D and 3D Graphics
acceleration, a VGA port, and 4 Mbps IrDA. The G3 Series had a large,
redesigned keyboard which included a new Function button allowing the
keyboard to take on the functionality of a full size 105-key keyboard. It
had 2 PC-card slots, which were CardBus compliant (a powerbook first), and
the 13.3" and 14.1" models included an S-Video output. The G3 Series had
two drive bays, either of which could hold a battery or a wide array of
3.5" expansion devices, such as floppy or zip modules. The right drive bay
could also accommodate larger 5.25" devices. The PowerBook G3 Series
started at $2,299 for 233 MHz with no floppy drive and a 12" screen, and
cost around $7,000 fully loaded. The PowerBook G3 Series was replaced at
the end of the summer, by a second revision of the same design. |